【 使用环境 】测试环境
【 OBSHELL】
【 使用版本 】4.3.5
【问题描述】
启动配置
oceanbase-ce:
servers:
# Please don’t use hostname, only IP can be supported
- 127.0.0.1
global:
home_path: /data/ob/observer
# The directory for data storage. The default value is $home_path/store.
# data_dir: /data
# The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
# redo_dir: /redo
# Starting from observer version 4.2, the network selection for the observer is based on the ‘local_ip’ parameter, and the ‘devname’ parameter is no longer mandatory.
# If the ‘local_ip’ parameter is set, the observer will first use this parameter for the configuration, regardless of the ‘devname’ parameter.
# If only the ‘devname’ parameter is set, the observer will use the ‘devname’ parameter for the configuration.
# If neither the ‘devname’ nor the ‘local_ip’ parameters are set, the ‘local_ip’ parameter will be automatically assigned the IP address configured above.
# devname: eth0
mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
obshell_port: 2886 # Operation and maintenance port for Oceanbase Database. The default value is 2886. This parameter is valid only when the version of oceanbase-ce is 4.2.2.0 or later.
zone: zone1
cluster_id: 1
# please set memory limit to a suitable value which is matching resource.
memory_limit: 8G # The maximum running memory for an observer
system_memory: 2G # The reserved system memory. system_memory is reserved for general tenants. The default value is 30G.
datafile_size: 10G # Size of the data file.
datafile_next: 10G # the auto extend step. Please enter an capacity, such as 2G
datafile_maxsize: 300G # the auto extend max size. Please enter an capacity, such as 20G
log_disk_size: 50G # The size of disk space used by the clog files.
cpu_count: 16
production_mode: false
enable_syslog_wf: false # Print system logs whose levels are higher than WARNING to a separate log file. The default value is true.
max_syslog_file_count: 4 # The maximum number of reserved log files before enabling auto recycling. The default value is 0.
obshell输出了
±-------------------------------------------------------+
| obshell Dashboard |
±----------------------±-----±---------------±-------+
| url | user | password | status |
±----------------------±-----±---------------±-------+
| http://127.0.0.2:2886 | root | ‘1qaz@WSX3edc’ | active |
±----------------------±-----±---------------±-------+
这样导致了obshell无法访问 这里obshell我应该怎么配置？按照理想情况应该是通过127.0.0.1:2886访问，实际缺输出了127.0.0.1
【附件及日志】
2 个赞
学习了
很棒，优秀
部署报错的obd日志麻烦提供一份。看着obshell的ip变为了127.2了
学习了解下