【 使用环境 】生产环境
【 OB OCP 】
【 使用版本 】4.3.5（LTS）
【 问题描述 】一键安装包obd黑屏部署OB4.3.5后找不到ocp租户密码，grep password ~/.obd/cluster/tsc_ob/config.yaml查到的密码校验失败，请问能否找到正确的密码或重置密码？
【 复现路径 】obd黑屏部署后未进行任何操作
1 个赞
如果是为了学习的话,最好对一键安装的脚步逻辑了解一下比较好
- 您把 您一键安装的 链接发下
- 您把您的密码校验错误截图发下
- ocp的租户有 源数据库 有大约三种租户 sys租户 ocp元数据租户 ocp监控租户。 等
报错信息尽可能详细点。
1.。odb的配置文件发下
2. 您是根据那篇文档操作的 链接发下
- 有没有可能是sys租户呢？
ocp租户是之前的ocp-express，目前版本很早就修改为ocp_meta，你试试
参照官方文档部署的，配置文件如下，不是sys租户。
PS：这个配置最早部署4.2.5时是没问题的。
## Only need to configure when remote login is required
user:
username: root
password: ********
# key_file: /root/.ssh/id_rsa
port: 22
timeout: 30
oceanbase-ce:
servers:
- name: ob1
ip: 192.168.8.47
- name: ob2
ip: 192.168.8.48
- name: ob3
ip: 192.168.8.49
global:
production_mode: true
# Starting from observer version 4.2, the network selection for the observer is based on the 'local_ip' parameter, and the 'devname' parameter is no longer mandatory.
# If the 'local_ip' parameter is set, the observer will first use this parameter for the configuration, regardless of the 'devname' parameter.
# If only the 'devname' parameter is set, the observer will use the 'devname' parameter for the configuration.
# If neither the 'devname' nor the 'local_ip' parameters are set, the 'local_ip' parameter will be automatically assigned the IP address configured above.
# devname: eth0
# if current hardware's memory capacity is smaller than 50G, please use the setting of "mini-single-example.yaml" and do a small adjustment.
memory_limit: 50G # The maximum running memory for an observer
# The reserved system memory. system_memory is reserved for general tenants. The default value is 30G.
system_memory: 8G
datafile_size: 143G # Size of the data file.
datafile_next: 160G
datafile_maxsize: 2T
log_disk_size: 143G # The size of disk space used by the clog files.
enable_syslog_wf: false # Print system logs whose levels are higher than WARNING to a separate log file. The default value is true.
max_syslog_file_count: 30 # The maximum number of reserved log files before enabling auto recycling. The default value is 0.
# Cluster name for OceanBase Database. The default value is obcluster. When you deploy OceanBase Database and obproxy, this value must be the same as the cluster_name for obproxy.
appname: tsc_ob
home_path: /home/tsc_ob
root_password: ********
# proxyro_password: # proxyro user pasword, consistent with obproxy's observer_sys_password, can be empty
# ocp_meta_db: ocp_express # The database name of ocp express meta
# ocp_meta_username: meta # The username of ocp express meta
# ocp_meta_password: '' # The password of ocp express meta
# ocp_agent_monitor_password: '' # The password for obagent monitor user
ocp_meta_tenant: # The config for ocp express meta tenant
tenant_name: ocp
max_cpu: 2
memory_size: 4G
log_disk_size: 7680M # The recommend value is (4608 + (expect node num + expect tenant num) * 512) M.
# In this example , support multiple ob process in single node, so different process use different ports.
# If deploy ob cluster in multiple nodes, the port and path setting can be same.
ob1:
mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
obshell_port: 2886 # Operation and maintenance port for Oceanbase Database. The default value is 2886. This parameter is valid only when the version of oceanbase-ce is 4.2.2.0 or later.
# The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
home_path: /home/tsc_ob
# The directory for data storage. The default value is $home_path/store.
# data_dir: /data
# The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
# redo_dir: /redo
zone: zone1
ob2:
mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
obshell_port: 2886 # Operation and maintenance port for Oceanbase Database. The default value is 2886. This parameter is valid only when the version of oceanbase-ce is 4.2.2.0 or later.
# The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
home_path: /home/tsc_ob
# The directory for data storage. The default value is $home_path/store.
# data_dir: /data
# The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
# redo_dir: /redo
zone: zone2
ob3:
mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
obshell_port: 2886 # Operation and maintenance port for Oceanbase Database. The default value is 2886. This parameter is valid only when the version of oceanbase-ce is 4.2.2.0 or later.
# The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
home_path: /home/tsc_ob
# The directory for data storage. The default value is $home_path/store.
# data_dir: /data
# The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
# redo_dir: /redo
zone: zone3
obproxy-ce:
# Set dependent components for the component.
# When the associated configurations are not done, OBD will automatically get the these configurations from the dependent components.
depends:
- oceanbase-ce
servers:
- 192.168.8.46
global:
listen_port: 2883 # External port. The default value is 2883.
prometheus_listen_port: 2884 # The Prometheus port. The default value is 2884.
rpc_listen_port: 2885
home_path: /home/tsc_ob/obproxy
# oceanbase root server list
# format: ip:mysql_port;ip:mysql_port. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
rs_list: 192.168.8.47:2881;192.168.8.48:2881;192.168.8.49:2881
enable_cluster_checkout: false
# observer cluster name, consistent with oceanbase-ce's appname. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
cluster_name: tsc_ob
skip_proxy_sys_private_check: true
enable_strict_kernel_release: false
# obproxy_sys_password: # obproxy sys user password, can be empty. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
# observer_sys_password: # proxyro user pasword, consistent with oceanbase-ce's proxyro_password, can be empty. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
obagent:
depends:
- oceanbase-ce
servers:
- name: ob1
ip: 192.168.8.47
- name: ob2
ip: 192.168.8.48
- name: ob3
ip: 192.168.8.49
global:
home_path: /home/tsc_ob/obagent
ocp-express:
depends:
- oceanbase-ce
- obproxy-ce
- obagent
servers:
- 192.168.8.46
global:
# The working directory for prometheus. prometheus is started under this directory. This is a required field.
home_path: /home/tsc_ob/ocp-express
# log_dir: /home/oceanbase/ocp-express/log # The log directory of ocp express server. The default value is {home_path}/log.
memory_size: 2G # The memory size of ocp-express server. The recommend value is 512MB * (expect node num + expect tenant num) * 60MB.
logging_file_total_size_cap: 10G # The total log file size of ocp-express server
logging_file_max_history: 7 # The maximum of retention days the log archive log files to keep. The default value is unlimited
ocp租户，4.2.5是ocp_meta，4.3.5就是ocp了。
你试试使用obd web白屏化部署，ocp-express目前已不建议部署使用来，后续对该产品维护下降
白屏部署ocp租户是自己设置的，yaml文件中未展示么 发一份看看