## Only need to configure when remote login is required
user:
  username: root
  password: NJJN@20021201
#   key_file: your ssh-key file path if need
#   port: your ssh port, default 22
#   timeout: ssh connection timeout (second), default 30
oceanbase-ce:
  servers:
    - name: server1
      ip: 192.168.110.10
#    - name: server2
#      ip: 192.168.110.11
  global:
    # Starting from observer version 4.2, the network selection for the observer is based on the 'local_ip' parameter, and the 'devname' parameter is no longer mandatory.
    # If the 'local_ip' parameter is set, the observer will first use this parameter for the configuration, regardless of the 'devname' parameter.
    # If only the 'devname' parameter is set, the observer will use the 'devname' parameter for the configuration.
    # If neither the 'devname' nor the 'local_ip' parameters are set, the 'local_ip' parameter will be automatically assigned the IP address configured above.
    # devname: eth0
    # if current hardware's memory capacity is smaller than 50G, please use the setting of "mini-single-example.yaml" and do a small adjustment.
    memory_limit: 8G # The maximum running memory for an observer
    # The reserved system memory. system_memory is reserved for general tenants. The default value is 30G.
    system_memory: 2G
    datafile_size: 16G # Size of the data file.
    log_disk_size: 16G # The size of disk space used by the clog files.
    enable_syslog_wf: false # Print system logs whose levels are higher than WARNING to a separate log file. The default value is true.
    max_syslog_file_count: 4 # The maximum number of reserved log files before enabling auto recycling. The default value is 0.
    # Cluster name for OceanBase Database. The default value is obcluster. When you deploy OceanBase Database and obproxy, this value must be the same as the cluster_name for obproxy.
    appname: obdemo
    #root_password: NJJN@20021201
    # proxyro_password: # proxyro user pasword, consistent with obproxy's observer_sys_password, can be empty
    # ocp_meta_db: ocp_express # The database name of ocp express meta
    # ocp_meta_username: meta # The username of ocp express meta
    # ocp_meta_password: '' # The password of ocp express meta
    # ocp_agent_monitor_password: '' # The password for obagent monitor user
    ocp_meta_tenant: # The config for ocp express meta tenant
      tenant_name: ocp
      max_cpu: 1
      memory_size: 1G
      log_disk_size: 7680M # The recommend value is (4608 + (expect node num + expect tenant num) * 512) M.
  # In this example , support multiple ob process in single node, so different process use different ports.
  # If deploy ob cluster in multiple nodes, the port and path setting can be same. 
  server1:
    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
    obshell_port: 2886 # Operation and maintenance port for Oceanbase Database. The default value is 2886. This parameter is valid only when the version of oceanbase-ce is 4.2.2.0 or later.
    # The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /home/admin/oblogproxy
    # The directory for data storage. The default value is $home_path/store.
    # data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    # redo_dir: /redo
    zone: zone1
 # server2:
 #   mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
 #   rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
 #   obshell_port: 2886 # Operation and maintenance port for Oceanbase Database. The default value is 2886. This parameter is valid only when the version of oceanbase-ce is 4.2.2.0 or later.
 #   #  The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
 #   home_path: /root/observer
    # The directory for data storage. The default value is $home_path/store.
    # data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    # redo_dir: /redo
 #   zone: zone2
#  server3:
#    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
#    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
#    obshell_port: 2886 # Operation and maintenance port for Oceanbase Database. The default value is 2886. This parameter is valid only when the version of oceanbase-ce is 4.2.2.0 or later.
#    #  The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
#    home_path: /root/observer
#    # The directory for data storage. The default value is $home_path/store.
#    # data_dir: /data
#    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
#    # redo_dir: /redo
#    zone: zone3
obproxy-ce:
  # Set dependent components for the component.
  # When the associated configurations are not done, OBD will automatically get the these configurations from the dependent components.
  depends:
    - oceanbase-ce
  servers:
    - 192.168.110.10
  global:
    listen_port: 2883 # External port. The default value is 2883.
    prometheus_listen_port: 2884 # The Prometheus port. The default value is 2884.
    home_path: /home/admin/obd/obproxy
    # oceanbase root server list
    # format: ip:mysql_port;ip:mysql_port. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
    rs_list: 192.168.110.10:2881;
    enable_cluster_checkout: false
    # observer cluster name, consistent with oceanbase-ce's appname. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
    # cluster_name: obcluster
    skip_proxy_sys_private_check: true
    enable_strict_kernel_release: false
    #obproxy_sys_password: NJJN@20021201
    # observer_sys_password: NJJN@20021201
obagent:
  depends:
    - oceanbase-ce
  servers:
    - name: server1
      # Please don't use hostname, only IP can be supported
      ip: 192.168.110.10
 #   - name: server2
 #     ip: 172.19.33.3
 #   - name: server3
 #     ip: 172.19.33.4
  global:
    home_path: /home/admin/obd/obagent
ocp-express:
  depends:
    - oceanbase-ce
    - obproxy-ce
    - obagent
  servers:
    - 192.168.110.11
  global:
    # The working directory for prometheus. prometheus is started under this directory. This is a required field.
    home_path: /home/admin/obd/ocp-express
    # log_dir: /home/oceanbase/ocp-express/log # The log directory of ocp express server. The default value is {home_path}/log.
    memory_size: 1G # The memory size of ocp-express server.  The recommend value is 512MB * (expect node num + expect tenant num) * 60MB.
    # logging_file_total_size_cap: 10G # The total log file size of ocp-express server
    # logging_file_max_history: 1 # The maximum of retention days the log archive log files to keep. The default value is unlimited