## Only need to configure when remote login is required
# user:
   username: DBA_zongzhiwen
   password: Mk8Mb7$d@h
#   key_file: your ssh-key file path if need
#   port: your ssh port, default 22
#   timeout: ssh connection timeout (second), default 30
oceanbase-ce:
  servers:
    - name: server1
      # Please don't use hostname, only IP can be supported
      ip: 10.102.6.39
    - name: server2
      ip: 10.102.6.44
    - name: server3
      ip: 10.102.6.20
  global:
    # Please set devname as the network adaptor's name whose ip is  in the setting of severs.
    # if set severs as "127.0.0.1", please set devname as "lo"
    # if current ip is 192.168.1.10, and the ip's network adaptor's name is "eth0", please use "eth0"
    devname: eth0
    # if current hardware's memory capacity is smaller than 50G, please use the setting of "mini-single-example.yaml" and do a small adjustment.
    memory_limit: 64G # The maximum running memory for an observer
    # The reserved system memory. system_memory is reserved for general tenants. The default value is 30G.
    system_memory: 30G
    datafile_size: 192G # Size of the data file.
    log_disk_size: 192G # The size of disk space used by the clog files.
    enable_syslog_wf: false # Print system logs whose levels are higher than WARNING to a separate log file. The default value is true.
    enable_syslog_recycle: true # Enable auto system log recycling or not. The default value is false.
    max_syslog_file_count: 4 # The maximum number of reserved log files before enabling auto recycling. The default value is 0.
    # Cluster name for OceanBase Database. The default value is obcluster. When you deploy OceanBase Database and obproxy, this value must be the same as the cluster_name for obproxy
 # appname: obcluster
    # root_password: # root user password
    # proxyro_password: # proxyro user pasword, consistent with obproxy's observer_sys_password, can be empty
    # ocp_meta_db: ocp_express # The database name of ocp express meta
    # ocp_meta_username: meta # The username of ocp express meta
    # ocp_meta_password: '' # The password of ocp express meta
    # ocp_agent_monitor_password: '' # The password for obagent monitor user
    ocp_meta_tenant: # The config for ocp express meta tenant
      tenant_name: ocp
      max_cpu: 1
      memory_size: 2G
      log_disk_size: 7680M # The recommend value is (4608 + (expect node num + expect tenant num) * 512) M.
  # In this example , support multiple ob process in single node, so different process use different ports.
  # If deploy ob cluster in multiple nodes, the port and path setting can be same.
  server1:
    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
    # The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /home/DBA_zongzhiwen/observer
    # The directory for data storage. The default value is $home_path/store.
    # data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    # redo_dir: /redo
    zone: zone1
  server2:
    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
    #  The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /home/DBA_zongzhiwen/observer
    # The directory for data storage. The default value is $home_path/store.
    # data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
 # redo_dir: /redo
    zone: zone2
  server3:
    mysql_port: 2881 # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
    rpc_port: 2882 # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
    #  The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /home/DBA_zogzhiwen/observer
    # The directory for data storage. The default value is $home_path/store.
    # data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    # redo_dir: /redo
    zone: zone3
obproxy-ce:
  # Set dependent components for the component.
  # When the associated configurations are not done, OBD will automatically get the these configurations from the dependent components.
  depends:
    - oceanbase-ce
  servers:
    - 10.102.6.20
  global:
    listen_port: 2883 # External port. The default value is 2883.
    prometheus_listen_port: 2884 # The Prometheus port. The default value is 2884.
    home_path: /home/DBA_zongzhiwen/obproxy
    # oceanbase root server list
    # format: ip:mysql_port;ip:mysql_port. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
    # rs_list: 192.168.1.2:2881;192.168.1.3:2881;192.168.1.4:2881
    enable_cluster_checkout: false
    # observer cluster name, consistent with oceanbase-ce's appname. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
    # cluster_name: obcluster
    skip_proxy_sys_private_check: true
 enable_strict_kernel_release: false
    # obproxy_sys_password: # obproxy sys user password, can be empty. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
    # observer_sys_password: # proxyro user pasword, consistent with oceanbase-ce's proxyro_password, can be empty. When a depends exists, OBD gets this value from the oceanbase-ce of the depends.
obagent:
  depends:
    - oceanbase-ce
  servers:
    - name: server1
      # Please don't use hostname, only IP can be supported
      ip: 10.102.6.39
    - name: server2
      ip: 10.102.6.44
    - name: server3
      ip: 10.102.6.20
  global:
    home_path: /home/DBA_zongzhiwen/obagent
prometheus:
  servers:
    - 10.102.6.20
  depends:
    - obagent
  global:
    # The working directory for prometheus. prometheus is started under this directory. This is a required field.
    home_path: /home/oceanbase/ocp-server
    # address: 0.0.0.0  # The ip address to bind to. Along with port, corresponds to the `web.listen-address` parameter.
    # port: 9090 # The http port to use. Along with address, corresponds to the `web.listen-address` parameter.
    # enable_lifecycle: true # Enable shutdown and reload via HTTP request. Corresponds to the `web.enable-lifecycle` parameter.
    # data_dir: /root/prometheus/data # Base path for metrics storage. Corresponds to the `storage.tsdb.path` parameter.
# basic_auth_users:  # Usernames and passwords that have full access to the web server via basic authentication. Corresponds to the `basic_auth_users` parameter.
    #   <username>: <password>  # The format of `basic_auth_users` : the key is the user name and the value is the password.
    # web_config: # Content of Prometheus web service config file. The format is consistent with the file. However, `basic_auth_users` cannot be set in it. Please set `basic_auth_users` above if needed. Corresponds to the `web.config.file` parameter.
    #   tls_server_config:
    #     # Certificate and key files for server to use to authenticate to client.
    #     cert_file: <filename>
    #     key_file: <filename>
    # config: # Configuration of the Prometheus service. The format is consistent with the Prometheus config file. Corresponds to the `config.file` parameter.
    #   rule_files:
    #   - rules/*rules.yaml
    #   scrape_configs:
    #   - job_name: prometheus
    #     metrics_path: /metrics
    #     scheme: http
    #     static_configs:
    #       - targets:
    #           - localhost:9090
    #   - job_name: node
    #     basic_auth:
    #       username: admin
    #       password: root
    #     metrics_path: /metrics/node/host
    #     scheme: http
    #     file_sd_configs:  # Set the targets to be collected by reading local files. The example is to collect targets corresponding to all yaml files in the 'targets' directory under $home_path.
    #     - files:
    #       - 'targets/*.yaml'
 #   - job_name: ob_basic
    #     basic_auth:
    #       username: admin
    #       password: root
    #     metrics_path: /metrics/ob/basic
    #     scheme: http
    #     file_sd_configs:
    #     - files:
    #       - 'targets/*.yaml'
    #   - job_name: ob_extra
    #     basic_auth:
    #       username: admin
    #       password: root
    #     metrics_path: /metrics/ob/extra
    #     scheme: http
    #     file_sd_configs:
    #     - files:
    #       - 'targets/*.yaml'
    #   - job_name: agent
    #     basic_auth:
    #       username: admin
    #       password: root
    #     metrics_path: /metrics/stat
    #     scheme: http
    #     file_sd_configs:
    #     - files:
    #       - 'targets/*.yaml'
 # additional_parameters: # Additional parameters for Prometheus service, among which `web.listen-address`, `web.enable-lifecycle`, `storage.tsdb.path`, `config.file` and `web.config.file` cannot be set. Please set them in the corresponding configuration above if needed.
    # - log.level: debug
grafana:
  servers:
    - 10.102.6.20
  depends:
    - prometheus
  global:
    home_path: /root/grafana
    login_password: oceanbase # Grafana login password. The default value is 'oceanbase'.
    # data_dir: # Path to where grafana can store temp files, sessions, and the sqlite3 db (if that is used).$data_dir can be empty. The default value is $home_path/data.
    # logs_dir: # Directory where grafana can store logs, can be empty. The default value is $data_dir/log.
    # plugins_dir: # Directory where grafana will automatically scan and look for plugins, can be empty. The default value is $data_dir/plugins.
    # provisioning_dir: # folder that contains provisioning config files that grafana will apply on startup and while running, can be empty. The default value is $home_path/conf/provisioning.
    # temp_data_lifetime: # How long temporary images in data directory should be kept. Supported modifiers h (hours), m (minutes), Use 0 to never clean up temporary files, can be empty. The default value is 24h.
    # log_max_days: # Expired days of log file(delete after max days), can be empty. The default value is 7.
    # domian: # The public facing domain name used to access grafana from a browser, can be empty. The default value is $server.ip.
    # port: # The http port to use, can be empty. The default value is 3000.

    # # list of datasources to insert/update depending on what's available in the database, can be empty.
    # # For more parameter settings, please refer to https://grafana.com/docs/grafana/latest/administration/provisioning/#datasources
    # datasources:
    #   name: # name of the datasource. Required and should not be 'OB-Prometheus'
    #   type: # datasource type. Required
    #   access: # access mode. direct or proxy. Required
    #   url: # the url of datasource
 # list of dashboards providers that load dashboards into Grafana from the local filesystem, can be empty.
    # For more information, please refer to https://grafana.com/docs/grafana/latest/administration/provisioning/#dashboards
    # providers:
    #   name: # an unique provider name. Required and should not be 'OceanBase Metrics'
    #   type: # provider type. Default to 'file'
    #   options:
    #     path: # path to dashboard files on disk. Required when using the 'file' type

    # # customize your Grafana instance by adding/modifying the custom configuration as follows
    # # for more information, please refer to https://grafana.com/docs/grafana/latest/setup-grafana/configure-grafana/#configure-grafana
    # # Here, setting parameters is required for format conversion.
    # # For example, if the original grafana configuration format is
    # #
    # # [section1.section2]
    # # key1 = value1
    # # key2 = value2
    # #
    # # Then when writing the configuration below, you need to write it as
    # #
    # # section1:
    # #   section2:
    # #     key1: value1
    # #     key2: value2
    # #
    # # Here we only list one item, because there are more than 500 items. Please add them according to your own needs.
    # customize_config:
    #   # original grafana configuration format is
    #   # [server]
    #   # protocol = http
    #   server:
    #     protocol: http
ocp-express:
 depends:
    - oceanbase-ce
    - obproxy-ce
    - obagent
  servers:
    - 10.102.6.20
  global:
    # The working directory for prometheus. prometheus is started under this directory. This is a required field.
    home_path: /root/ocp-express
    # log_dir: /home/oceanbase/ocp-express/log # The log directory of ocp express server. The default value is {home_path}/log.
    memory_size: 1G # The memory size of ocp-express server.  The recommend value is 512MB * (expect node num + expect tenant num) * 60MB.
    # logging_file_total_size_cap: 10G # The total log file size of ocp-express server
    # logging_file_max_history: 1 # The maximum of retention days the log archive log files to keep. The default value is unlimited